Code 86195863
Not available
Multiflow Mini Eco
Industrial centralized washdown system with adjustable pressure, designed to support simultaneous use by up to 2 operators through a centralized pipework network. Built for production departments where hygiene and operational continuity are daily requirements. A configuration with two separate distribution mains and quick-connect outlets at the pump discharge enables manual hose changeover in the event of a fault, keeping washdown operations running.
| Feature | Value |
|---|---|
| Length (mm) | 795 |
| Depth (mm) | 569 |
| Height (mm) | 1438 |
| Weight (kg) | 165 |
| Rated Power (Kw) | 11 |
| Supply Type | Three-phase (3P+N+PE) |
| Material | AISI 304L Stainless Steel, AISI 316L Stainless Steel |
| Absorbed Power (Kw) | 16 |
| Differential Magnetothermic Protection (A) | 32 |
| Piston Pump | Three ceramic-coated stainless steel pistons and special forged brass head |
| Engine RPM (RPM) | 1400 |
| Flow Range | 25 L/min (per pump) |
| Maximum Operators in Contemporary | 2 |
| Tank Capacity (L) | 60 |
| Recommended Water Hardness (mol/m³) | 1.5 |
| Recommended Water Temperature (°C) | 40 |
| Maximum Water Temperature (°C) | 75 |
| Water Drain Connection | Overflow Outlet Ø60 |
Centralized multi-pressure industrial washdown system on dual distribution mains for up to 2 operators, with one dedicated pump for each line;
Adjustable pressure and electromechanical control with automatic pump start and stop;
Operational continuity via quick couplings for manual line changeover in the event of a pump failure;
Automatic shut-off in the event of water shortage;
Supports pre-rinsing, foam application, washing and sanitising via dedicated accessories, sold separately from the system.
AISI 304L stainless steel structure with stainless steel tank and electromechanical management system.
The system must be connected to two separate distribution mains, which distribute the pressurised water from each pump across the department; the outlet of each pump is fitted with quick-release couplings to allow manual hose changeover in the event of mechanical failure, maintaining operational continuity.
The pumps are managed with automatic start and stop and include automatic shut-off in the event of water shortage.
The water entering the tank must already be premixed at the required wash temperature. A water hardness between 10 and 15 °f is recommended for the water supply.